What is the key to cooling the chiller and chiller?

The mechanism of the main factors of concern during cooling of water chillers is cold key. The air-cooled unit always adheres to the design concept of environmental protection, intelligence, and reliability, and provides new high-quality, efficient air-cooled unit products for the market. Refrigeration units at and below 30RT use imported fully enclosed scroll humidifiers, with an efficiency of 20% higher than humidifier humidifiers, stable operation, low vibration, and strong resistance to liquid hammer.

Among units with air-cooled water chillers above 30RT, air-cooled water chillers use imported semi-closed screw compressors, using the third generation patented tooth type, featuring small pressure drop and blowback area, high volumetric efficiency, low energy consumption, stable operation, low vibration, and low noise; The units below 15RT of air-cooled industrial water chillers adopt a refrigerant air outlet structure. In the 20RT-30RT unit, the cooling capacity adopts a modular ejection structure. BLD air-cooled water chillers and air-cooled heat pump units can all adopt a modular structure. Under the centralized control of a computer controller, each module unit can adjust the number of module operations according to the load situation, so as to maintain a good match between the cooling capacity of the refrigeration mechanism and the actual needs, achieving good energy-saving results;

Combined air-cooled units, or BLD air-cooled units, have independent refrigeration systems that are standby for each other. Any abnormality in a refrigeration unit will not affect the normal operation of other refrigeration units. When a refrigeration unit fails, the computer will issue a command to replace the faulty unit with a refrigerator in the standby state of other refrigeration units for remote operation, and the heating life of the unit remains relatively stable.

Using a refrigerator module structure, both air-cooled water chillers and air-cooled water chillers can be produced and transported according to standard module units. The entire module is assembled into a standard module with light weight and small volume at the installation site, greatly saving transportation and lifting costs. The corrugated reinforced aluminum finned tube made of internally threaded copper tubes and hydrophilic film materials is used as the air exchanger of the refrigerator, which is mechanically lengthened and has high efficiency. It is not easy to form ash, and operates in summer, and is not easy to form frost in winter.

The above is the content that the editor helped you organize. I hope it can help you. Please pay attention to our official website news for more!